Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 •
sales@purdyelectronics.com
• www.purdyelectronics.com
6/12/07
AND156HOP
Ultra Bright LED Lamps: Type 3
Weight: 0.31 g Unit: mm
1.0±0.2
1.0 MAX.
8.6±0.3
5.9±0.3
5.0±0.2
25.4 MIN.
1. Anode
2. Cathode
12
1.0 MIN.
0.5
0.5
2.54
Cathode Index
AND156HOP
InGaAlP Orange Light Emission
T-1 3/4 Package (5 mm)
Features
• New emission material (InGaAlP) orange LED
• Peak wavelength (
λ
p = 620 nm) high bright emission
• All plastic mold type, clear colorless lens
• Low drive current, (forward current = 1 to 20 mA)
• Excellent On-Off contrast ratio
• Fast response time, capable of pulse operation
• High power luminous intensity
• Suitable for Outdoor Message Signboards
Maximum Ratings (T
a
= 25°C)
Characteristics Symbol Rating Unit
Forward Current
I
F
50 mA
Reverse Voltage
V
R
5V
Power Dissipation
P
D
125 mW
Operating Temperature Range
T
Opr
-40 to 85 °C
Storage Temperature Range
T
Sig
-40 to 100 °C
Precaution
Please be careful of the following:
1. Soldering temperature: 260°C max
Soldering time: 5 sec. max
Soldering portion of lead: up to 1.6 mm from the body of the device
2. The lead can be formed up to 5 mm from the body of the device without forming stress.
Soldering should be performed after the lead forming.
Electro-Optical Characteristics (T
a
= 25°C)
Characteristics Symbol Test Condition Minimum Typical Maximum Unit
Forward Voltage
V
F
I
F
= 20 mA
–2.02.4V
Reverse Current
I
R
V
R
= 5 V
– – 10 µA
Luminous Intensity
I
V
I
F
= 20 mA
630 800 – mcd
Peak Emission Wavelength
λ
P
I
F
= 20 mA
– 620 – nm
Spectral Line Half Width
∆
λ
I
F
= 20 mA
–18–nm
Dominant Wavelength
λ
d
I
F
= 20 mA
– 615 – nm
Full Viewing Angle
θ
I
V
= 1/2 Peak
– 25 – degree
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.
• RoHS Compliant
Comments to this Manuals